Results 1 to 4 of 4

I have a new hire with a blackerry that was on BES, but is now ... RIM Desktop Software forum

  1. #1
    dolbnyc's Avatar
    dolbnyc no está en línea Stack level 1
    Join Date
    Dec 2007
    Posts
    5

    Question Local Sync issue after removal from BES

    Advertisement



    I have a new hire with a blackerry that was on BES, but is now on BIS.
    My problem is that I need to get this persons contacts off of the phone, and into his outlook.
    After the pc detects the pin, I chose outlook for syncronizing. When I syncronize, It looks like it starts to work, but then I get a "ding" from the pc, and nothing happens.
    I tried using the backup utilities advanced feature, and there are only 3 available items from the phone
    none of which point to contacts or address book.
    If I run an upgrade will I lose this persons data?
    What options do I have to get this data imported into Outlook?

  2. #2
    okamosy's Avatar
    okamosy no está en línea Stack level 2
    Join Date
    May 2007
    PIN/ID
    2067acbe
    Posts
    41

    Re: Local Sync issue after removal from BES

    You need to disable wireless sync on the blackberry before you can do a manual sync of contacts.

    If the Blackberry still shows enterprise activation under options:advanced options, it still has bes service books. Open the enterprise activation screen, then hold the alt key and type cnfg. Then disable wireless sync. You should be able to use dm then.
    ~via BB (wap.pinstack.com)~

  3. #3
    dolbnyc's Avatar
    dolbnyc no está en línea Stack level 1
    Join Date
    Dec 2007
    Posts
    5

    Re: Local Sync issue after removal from BES

    It does still have the enterprise activation.

    I will try this out!

    Thanks so Much!

  4. #4
    dolbnyc's Avatar
    dolbnyc no está en línea Stack level 1
    Join Date
    Dec 2007
    Posts
    5

    Re: Local Sync issue after removal from BES

    I tried the instructions above and got the following message

    " PIM syncronization is not enabled on the device"

    Is there a way to enable the PIM sync, thru some command key sequence.


    Thanks in advance!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •