Page 8 of 20 FirstFirst ... 345678910111213 ... LastLast
Results 106 to 120 of 297

It's very hard job and too much risky. In my country Bangladesh there is no ... BlackBerry Pearl forum

  1. #106
    postagola_bd's Avatar
    postagola_bd no está en línea Stack level 1
    Join Date
    Aug 2007
    Posts
    19

    Re: Trackball Cleaning and Disassembly w/ PICTURES

    Advertisement



    It's very hard job and too much risky. In my country Bangladesh there is no sales centre of Blackberry and there is no service or repair centre of it.My sister sent it to me from USA.So if any damage to trackball occur while cleaning and removal then i will b in great problem and i will b totally helpless.i have no necessary tools u mentioned and showed in photos for cleaning and removal the trackball.MY TRACKBALL IS NOW BLACK AS JAGUAR:cry:

  2. #107
    AielAshaman's Avatar
    AielAshaman no está en línea Stack level 1
    Join Date
    May 2007
    Posts
    0

    Re: Trackball Cleaning and Disassembly w/ PICTURES

    Dude you rock!!!! I wish I had your directions before I accidentally took it apart but they were damn useful in getting it back together. Thanks!!!!!!!!!!!!

  3. #108
    beamolite's Avatar
    beamolite no está en línea Stack level 3
    Join Date
    Jul 2007
    PIN/ID
    23F73F86
    Posts
    107
    Quote Originally Posted by regor99
    Metal retaining clip snapped. (Mighty pudgy fingers!)
    I have the same problem with my fingers. I bent it so much it wouldn't go back in. I left it out and trackball works just fine.

  4. #109
    danielbowen's Avatar
    danielbowen no está en línea Stack level 2
    Join Date
    Aug 2007
    Posts
    20

    Re: Trackball Cleaning and Disassembly w/ PICTURES

    I've had to do this several times, great looking out! Works great!

  5. #110
    davey.mac's Avatar
    davey.mac no está en línea Stack level 2
    Join Date
    Jun 2007
    Posts
    20

    Re: Trackball Cleaning and Disassembly w/ PICTURES

    hey reddog, i just have a quick question. i've bought a new housing for my 8800 from cnn.cn and i figured i'd see if i could change out the trackball at the same time. you say there are magnetic rollers in the mechanism. do you perchance see the use of ball bearings, glass or plastic as a good replacement for the trackball? i was wondering this because the 8800 does not have the color leds and so i can't use ColorPearl as a good disguise to the actual dirtyness of the trackball. thanks for all your help!

  6. #111
    mrfidget's Avatar
    mrfidget no está en línea Stack level 2
    Join Date
    Aug 2007
    Posts
    77

    Re: Trackball Cleaning and Disassembly w/ PICTURES

    Wow thanks red been wondering how to do that since I got the pearl like a year since I bought my pearl you rock my sox~via waffle iron of doom (wap.pinstack.com)~

  7. #112
    reddog187's Avatar
    reddog187 no está en línea Stack Moderator
    Join Date
    Dec 2006
    PIN/ID
    STACK
    Posts
    8,907

    Re: Trackball Cleaning and Disassembly w/ PICTURES

    Quote Originally Posted by davey.mac
    hey reddog, i just have a quick question. i've bought a new housing for my 8800 from cnn.cn and i figured i'd see if i could change out the trackball at the same time. you say there are magnetic rollers in the mechanism. do you perchance see the use of ball bearings, glass or plastic as a good replacement for the trackball? i was wondering this because the 8800 does not have the color leds and so i can't use ColorPearl as a good disguise to the actual dirtyness of the trackball. thanks for all your help!
    I don't think a different ball would work since it needs to be able to catch on the little ridges of the rollers. The glass would probably be too smooth along with the bearing. plastic may work depending on the serface. It would be worth a try...I have yet to find anything close to the size. Also I have a new cruve so I will probably just buy some spares since they're inexpensive at cnn.cn.

    Good luck though...let me know how it goes if you try it.

  8. #113
    MR. H's Avatar
    MR. H no está en línea Stack level 3
    Join Date
    Jan 2007
    PIN/ID
    301a4489
    Posts
    132

    Re: Trackball Cleaning and Disassembly w/ PICTURES

    hey red what kind of solution did you use to clean you track ball i used tooth past crest lol it did ok
    STILL THE KING

  9. #114
    guyheavensent's Avatar
    guyheavensent no está en línea Stack level 4
    Join Date
    Sep 2007
    PIN/ID
    717cff09
    Posts
    548

    Re: Trackball Cleaning and Disassembly w/ PICTURES

    i prefer gorilla glue to clean my ballz

  10. #115
    MR. H's Avatar
    MR. H no está en línea Stack level 3
    Join Date
    Jan 2007
    PIN/ID
    301a4489
    Posts
    132

    Re: Trackball Cleaning and Disassembly w/ PICTURES

    that went over my head why gorilla glue
    STILL THE KING

  11. #116
    reddog187's Avatar
    reddog187 no está en línea Stack Moderator
    Join Date
    Dec 2006
    PIN/ID
    STACK
    Posts
    8,907

    Re: Trackball Cleaning and Disassembly w/ PICTURES

    I don't clean the actual trackball...never have...not really worth the time since it gets pretty stained.

  12. #117
    haLFbR33D's Avatar
    haLFbR33D no está en línea Stack level 1
    Join Date
    May 2007
    PIN/ID
    23f3f7e8
    Posts
    2

    Re: Trackball Cleaning and Disassembly w/ PICTURES

    I had a lil trouble getting it to work at first but a using the scroll for a few minutes had it going again... Thanks

  13. #118
    spwb1471's Avatar
    spwb1471 no está en línea Stack level 1
    Join Date
    May 2007
    PIN/ID
    PM me :)
    Posts
    19

    Re: Trackball Cleaning and Disassembly w/ PICTURES

    Thats great info...

  14. #119
    rama_lakshmi's Avatar
    rama_lakshmi no está en línea Stack level 1
    Join Date
    Apr 2007
    PIN/ID
    519109
    Posts
    1

    Re: Trackball Cleaning and Disassembly w/ PICTURES

    Hi
    Thanks. Good work. I am going to replace my trackball . Hope this is going to help.

    Thanks again.

  15. #120
    WoPStA7's Avatar
    WoPStA7 no está en línea Stack level 1
    Join Date
    Oct 2007
    Posts
    10

    Re: Trackball Cleaning and Disassembly w/ PICTURES

    thanks for the info my bb is nice and clean now

Page 8 of 20 FirstFirst ... 345678910111213 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •