Results 1 to 8 of 8

I thought I would share this tidbit of info for all you BlackBerry users that ... BlackBerry Internet & Email forum

  1. #1
    Join Date
    Mar 2008
    PIN/ID
    LESS
    Posts
    1,757

    Connect a computer to the Internet using a GPRS, EDGE, or UMTS BlackBerry's

    Advertisement



    I thought I would share this tidbit of info for all you BlackBerry users that always wondered how to tether your BlackBerry to your Desktop or a Laptop. So enjoy it sure helped me.

    Environment
    • BlackBerry® Desktop Software 4.1 and later
    • BlackBerry smartphones
    • Windows® 2000 and XP
    Note: Research In Motion (RIM) provides some support for the tethered modem; the installation of the Standard Modem Driver is supported. See KB05178 for more details about support for the tethered modem.
    Important: Contact your service provider to obtain the user name and password you require to configure dial-up networking. Also, ask your service provider if additional charges are incorporated when connecting to the Internet using the BlackBerry smartphone as a tethered modem.


    Procedure

    A BlackBerry smartphone with tethered modem capabilities can be used as an external modem to connect a computer to the Internet.
    Summary of Tasks

    To set up a tethered modem, complete the following tasks:
    1. Install BlackBerry Desktop Software 4.1 or later (one time only).
    2. Set up the Internet access point name (APN) (one time only).
    3. Configure dial-up networking (one time only).
    4. Connect to the Internet using dial-up networking.
    Task 1
    Install BlackBerry Desktop Software 4.1 or later on your computer.
    When you install BlackBerry Desktop Software, the drivers that allow the BlackBerry smartphone to communicate through the Universal Serial Bus (USB) port and virtual communications port are installed. The standard modem, which is used by dial-up networking, is also installed.
    Note: If upgrading your BlackBerry Desktop Software from version 4.0 to 4.1, the required vrtual communications port and standard modem might be removed during the upgrade process. If this is the case, re-install the BlackBerry Desktop Software 4.1 or later and choose the Repair option to re-install these components.
    Task 2
    Set up an Internet APN.
    1. Click Start > Settings > Control Panel.
    2. Double-click Phone and Modem Options.
    3. In the Phone and Modem Options window, click the Modems tab.
    4. Select Standard Modem and click Properties.
    5. Click Change Settings.
    6. In the Standard Modem Properties window, click the Advanced tab.
    7. In the Extra initialization commands field, type the following: +cgdcont=1,"IP","<your Internet APN>"
      Note: The following is applicable for T-Mobile® customers only:
      The extra initialization command is: +cgdcont=1,"IP","wap.voicestream.com"
      Note: If you do not know your Internet APN, or if you do not have an Internet APN, contact your service provider.
    8. Click OK.
    9. In the Phone and Modem Options window, click OK.
    Task 3
    To configure dial-up networking, complete the procedure that is appropriate to the operating system you are using:
    Windows Vista™
    1. Click Start.
    2. Select Connect To.
    3. Click Setup a connection or network.
    4. Click Setup a dialup connection.
    5. In the Dial-up phone number field type *99#.
    6. Type the user name and password provided by your service provider.
    7. In the Connection Name field type BlackBerry.
    8. Click Dialing Rules.
    9. Make sure the profile created in Task 2 has been selected, and then click OK.
    10. Select Connect to establish an internet.
    Note: For instructions on connecting a computer to the Internet using a BlackBerry smartphone with CDMA as a tethered modem, see KB04664.
    Windows XP operating system
    1. Click Start > Settings > Network Connections.
    2. Double-click New Connection Wizard. The New Connection Wizard opens.
    3. Click Next.
    4. Select the Connect to the Internet option. Click Next.
    5. Select Set up my connection manually. Click Next.
    6. Select Connect using a dial-up modem. Click Next.
    7. If the Select a Device screen appears, select the Modem - Standard Modem check box. Click Next.
    8. In the ISP Name field, type a name for your connection. Click Next.
    9. In the Phone number field, type *99#. Click Next.
    10. Indicate which users will have access to the connection. Click Next.
    11. Type the user name and password provided by your service provider. Click Next.
    12. Click Finish.
    13. In the Connect window, click Properties.
    14. In the Properties window, verify that Modem - Standard Modem appears beneath the Connect using heading, and then click Configure.
    15. In the Modem Configuration window, clear the Enable hardware flow control check box and make sure none of the other check boxes are selected. Click OK. In the Properties window, click OK.
    Windows 2000 operating system
    1. Click Start > Settings > Control Panel.
    2. Double-click Network and Dial-up Connections. Note: The following is applicable for T-Mobile customers only:
      Under the networking tab in the properties window for the dial-up connection, clear the Enable LCP Extensions check box, as well as all check boxes beneath the PPP Settings window.
    3. Double-click Make New Connection. The Network Connection Wizard opens.
    4. Click Next.
    5. Choose Dial-up to private network. Click Next.
    6. In the Phone number field, type *99#. Click Next.
    7. Indicate which users will have access to the connection. Click Next.
    8. Type a name for your connection. Click Finish.
    9. In the Connect window, click Properties.
    10. In the Properties window, verify that Modem - Standard Modem is selected, then click Configure.
    11. In the Modem Configuration window, clear the Enable hardware flow control check box and make sure none of the other check boxes are selected. Click OK.
    12. In the Properties window, click OK.
    Task 4
    Connect to the Internet using dial-up networking.
    Note: During this procedure, do not operate the BlackBerry® Browser or any third-party applications on the BlackBerry smartphone. An active data session might interfere with the modem connection. Also, make sure an ethernet connection is not active at the same time.
    1. Connect the BlackBerry smartphone to the computer.
    2. Open BlackBerry Desktop Manager.
    3. Click Start > Settings > Network Connections > <name of your new connection>.
    4. Type the user name and password provided by your service provider.
    5. Click Dial.

    The following BlackBerry smartphones include wireless modem functionality2:
    No need to carry a wireless PC card – simply connect and browse the web and exchange files at broadband speeds. __________________

  2. #2
    kieranwest's Avatar
    kieranwest no está en línea Device Pro
    Join Date
    Jul 2007
    PIN/ID
    Ask Me:)
    Posts
    1,208
    Great Tutorial RSC, I'm sure many stackers will take advantage of this.

  3. #3
    Join Date
    Mar 2008
    PIN/ID
    LESS
    Posts
    1,757
    Thanks... I had been looking for some clear definition for quite sometime now.

  4. #4
    AYN's Avatar
    AYN
    AYN no está en línea Stack level 2
    Join Date
    Feb 2008
    Posts
    28
    ~via BB (wap.pinstack.com)~anyone tried? Great instruction. Thx!

  5. #5
    toymachinejg's Avatar
    toymachinejg no está en línea Stack level 3
    Join Date
    Oct 2006
    PIN/ID
    24232f19
    Posts
    309
    HELP i cant set up the Extra initialization commands im on vista

  6. #6
    kieranwest's Avatar
    kieranwest no está en línea Device Pro
    Join Date
    Jul 2007
    PIN/ID
    Ask Me:)
    Posts
    1,208
    Are you with T-Mobile as your profile indicates?

  7. #7
    toymachinejg's Avatar
    toymachinejg no está en línea Stack level 3
    Join Date
    Oct 2006
    PIN/ID
    24232f19
    Posts
    309
    yeah

  8. #8
    kieranwest's Avatar
    kieranwest no está en línea Device Pro
    Join Date
    Jul 2007
    PIN/ID
    Ask Me:)
    Posts
    1,208
    Can you please clarify on what you mean by "you can't set extra initialization commands" I've done this on vista before and the initialization should be set to +cgdcont=1,"IP","wap.voicestream.com"

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •